Important Usage Instructions:
- Please shake several times before use. Hold the nozzle at a 45° to 60° angle to the board, 10-14 inches away, and gently press the nozzle to ensure the spray evenly covers the board.
- Spraying twice will be more even.
- The spray will dry in 5 minutes. Once the spray has dried, you can perform inkjet printing on the M1 Ultra.
Wood printing fixative spray is applied to the surface of the wood and then combined with M1 Ultra, which enhances print quality by achieving higher color saturation and preventing patterns from bleeding. Please note that the spray is initially clear in color.
Spray area: Can be used to spray 6-12 pieces of 12 "x 12" plywood (1 coat=12 pieces, 2 coats=6 pieces).
This spray is water-based, colorless, odorless, safe, and non-toxic. All raw materials meet international daily chemical quality standards. The raw materials are made of polymer composites that are resistant to yellowing.
Please note that the spray should be stored at a temperature of 113°F or below. Ensure proper ventilation, keep it away from direct sunlight and open flames, and keep it out of reach of children.
xTool Selected Materials are terrific partners of xTool laser machines. It is recommended that you open the package within one week of receiving the goods. If you find any quality problems with the materials, please contact us, xTool Selected will provide you with a 30-day unconditional return and exchange service.

Material-Clearance